1. When the inertia torque of the driven component is large, if the braking system or steering or shunting must be braked in the short term, a commercial safety valve oil buffer should be placed in the pump oil control circuit to prevent the hydraulic press from destroying safety accidents caused by excessive impact.
2. When using quantitative analysis of the motor, if you want to start and stop stably, you should choose the necessary working pressure manipulation or flow monitoring method in the circuit principle.
3. When using the hydraulic motor as the driving force component of the lifting spreader or walking equipment, try to set the speed limiting valve to prevent the lifting object from falling quickly or the car from going downhill and causing major safety accidents.
4. Because the hydraulic motor often leaks, when the import and export trade of the hydraulic motor turns off the braking system, it will still drag gradually. When the braking system must be applied for a long time, another braking system should be installed to prevent rotation.
5. When it is necessary to overload the start, it is necessary to pay attention to the starting torque value of the hydraulic motor, because the starting torque of the hydraulic motor is lower than the rated torque, if ignored, the work organization will not work.
6. Because the condensing type (inlet and outlet working pressure) of the hydraulic motor is higher than atmospheric pressure, the discharge pipe of the motor should be sent to the automobile fuel tank separately, and cannot be connected with the return oil pipeline of the hydraulic motor.
